Support Camera & Software Updates X7D Systems MAC OSX and Linux
X7D Downloads for Mac/Linux Users
Click each to begin download
X7D Base Software (for PC Base and CellBase Users)
LINUX X7D PCBase x86, (Ver 1.6, Pkg p2) (April 27, 2012)
MAC X7D PCBase OSX Intel (Ver 1.6, Pkg p2) (April 27, 2012)
Darwine 1.0 (required for OSX version of PCBase and standalone camera software)
Latest Version is 1.3.0
To update your X7D camera firmware:
First save the zip file
Then unzip the update file and save the unzipped file to a SD card.
Make certain that you are using a fully charged battery that will power the camera through the update process.
Remove the power from the camera.
Insert the SD Card into the camera.
Connect the power to the camera.
The camera will start up and begin the update. You will see a message on the LCD that says the firmware is programming.
The update process takes less than 1 minute. Do not remove the SD card during the firmware update.
After the camera's firmware has been updated, the camera will automatically reboot.
Once the camera is finished booting up, it is ready for use. You can remove the SD card at this time.